Repair · Recreation · Paint · Custom builds · Oklahoma City

Repaired. Recreated. Built to show.

One shop for the whole exterior: fiberglass and carbon fiber repair, discontinued parts recreated, custom paint, body kit installs, widebody builds, and full show cars. One person does all the work, and every job is held to show standard.

Hasibur “Hershey” Khan leaning into the rear of a primered widebody car in the Ikigai Garage shop
Hershey in a dark shirt grinding a quarter panel on a car, with sparks flying
Hershey smiling and flashing a peace sign from inside a roll cage
Hershey sitting behind a gray fiberglass bumper in the shop, sizing up the repair
Hasibur “Hershey” Khan, founder of Ikigai Garage. Hands on with every panel.
FRPCFRPShow carsFitmentCustom mods

What we do

FRP repair

Cracks, spider-webbing, torn mounting tabs, and delaminated corners on body panels, housings, covers, and fairings. Rebuilt with matched layup, then faired for paint.

Carbon fiber repair

Panel, cover, wing, and structural part repairs on weave or plain-finish carbon. Structural fixes first, then cosmetic refinishing.

Recreating discontinued parts

Parts that are no longer sold, recreated from a damaged original or from reference so the replacement fits the way the factory piece did.

Custom modifications

One-off fabrication and fitment work in fiberglass and carbon fiber, built to suit your project instead of a catalog.

Show car builds

Full builds from rust to show ready: paint, body kits, widebody work, and one-off fabrication, finished to show standard.

Fitment & install

Test fitting, trimming, hardware, and alignment so repaired parts sit flush where they belong.

Recent work

BeforeDamaged 1992 Nissan 240SX front bumper on the car before repair
BeforeClose-up of the torn, cracked fiberglass on the bumper
BeforeBumper removed from the car, showing the damage
BeforeInside of the bumper showing the cracked and delaminated fiberglass
AfterFinished bumper rebuilt and refinished in gloss white, sitting on a car hood
Recent work · Fiberglass

1992 Nissan 240SX front bumper rebuild

A cracked, torn, and delaminated fiberglass front bumper rebuilt and refinished in gloss white.

BeforeBroken RE Amemiya front bumper for an FD RX-7 lying in pieces on the shop floor, with cracks across the gray paint
AfterRebuilt RE Amemiya front bumper for an FD RX-7 in white primer with a black lip, standing in front of a garage door
Recent work · Fiberglass

FD RX-7 RE Amemiya front bumper rebuild

A badly broken RE Amemiya front bumper rebuilt and refinished.

BeforeCracked fiberglass BN Sports front bumper for a JZX100 lying on concrete, with white stress cracks near the lower openings
AfterRepaired BN Sports front bumper for a JZX100 refinished in a color-matched gray, with a paint sample card beside it
Recent work · Fiberglass

JZX100 BN Sports front bumper repair

A cracked BN Sports front bumper repaired and color matched.

BeforeWorn Subaru STI carbon fiber rear hatch with dull, faded finish leaning against a building
AfterRefurbished Subaru STI carbon fiber rear hatch with a deep gloss clearcoat and visible weave, in the paint booth
Recent work · Carbon fiber

Subaru STI carbon rear hatch refurbishment

A carbon fiber rear hatch refurbished to new condition.

Inquiries

Request a quote

Tell us what it is, which part it is, and what's wrong with it. Photos make a quote faster, so add a few clear shots of the damage below.

Phone: 405-474-5654
Email: ikigaigarageokc@gmail.com
Shop: Oklahoma City, OK

Photos

Add up to three photos. Each submission can be at most 8 MB in total, so use smaller or cropped photos if your phone makes large ones.

Custom show cars

Full builds from Ikigai Garage: custom paint, body kits, widebody work, and one-off fabrication, finished to show standard.

BeforeRusty, sanded-down Nissan S13 rear quarter in the shop with masking tape and a sander on the floor
BeforeRusted S13 trunk floor and wheel wells before restoration
BeforeRust and old sealer on the S13 rear floor behind the roll cage
BeforeClose-up of rust and a rotted seam on the S13 floor next to a cage tube
BeforeClose-up of corrosion and debris beside a roll cage tube in the S13
In progressS13 interior stripped to bare metal with a roll cage and sanding tools
AfterS13 interior with roll cage, blue Sparco Pro 2000 seats and fresh paint on the cage
AfterRestored and repainted S13 trunk in light green
AfterFinished S13 in light green paint with widebody fenders in the shop under hex lighting
AfterFinished S13 coupe in light green with widebody kit, vented hood and bronze wheels parked outside
Show car · Nissan S13

Nissan S13 overhaul

From rust bucket to show ready rocket.

BeforeCracked and delaminated fiberglass rear fender flare with exposed glass fibers
BeforeClose-up of the cracked paint and torn fiberglass at the flare edge
BeforeClose-up of exposed fiberglass strands and peeling paint beside the side marker
In progressGray sedan in the shop with body panels removed and bodywork underway
AfterFinished black Infiniti M45 sedan with a custom front bumper and polished wheels parked outside
Show car · Y34 M45

Y34 M45 VIP build

A VIP-style build on a Y34 M45.